|Motion control solution (energy saving & better process control): frequency inverter, variable speed drive (VSD), VFD, adjustable frequency drive (AFD), closed loop vector AC drive, motor soft starter, brake units...|
|Home |About |Products |Certificate |Testimonial |Quality |Application |Contact |Faq |Jobs |Sitemap|
Application in winding with PI9000 frequency inverter
1. process requirement:
a. wind up and back off control function, wind up condition in normal working.
b. Require the tension rocker stable during the whole working period.
c. Winding speed required above 1200m/min(winding inverter running frequency above 60HZ)
d. Band-type brake immediately while stop.
2. Inverter function requirement:
a. terminal control , foreward running FWD(wind up),reversal running REV(back off)
b. frequency source switch in wind up and back off condition, wind up use PID control, while back off use AI1 given frequency.
c. Require immediately PID adjust when wind up, acceleration and deceleration time is 0.1S,so the inverter should equipment with brake unit.
3. Structural drawing and system control:
4. Control application and adjust explanation:
The wind up inverter as to adjust frequency during the adjustment, as the wind up rolling diameter increase, the line speed should be increased, use PI9000 as line speed constant control, the main wind up inverter PI9200 055G3,control the motor to winding, as the feedback single of the displacement sensor to adjust the speed, keep the tension rocker stable, just as a simple PID control. The winding motor was not running while back off, back off motor reverse control, the speed was given by potentiometer AI1.for avoid break the line when the back off speed was too fast, there need a top frequency, the acceleration and deceleration time need to be more.
5. The detail parameters set for main inverter:
U0.01:0 Vector control W/O PG
U0.02:1 Terminal block control
U0.03:8 PID control setting
U0.04:2 Analog AI1 setting
U0.07:2 switch between frequency source master setting and auxiliary setting
U0.10:50HZ Maximum output frequency
U0.12:50HZ Upper limit frequency
U0.17:0.1S Acceleration time 1
U0.18:0.1S Deceleration time 1
U2.00:60 Speed loop low P
U2.01:0.35S Speed loop low integral time U2.03:60 Speed loop high P
U2.04:0.60S Speed loop high integral time U4.00:1 Forward run
U4.01:2 Reverse run
U4.03:16 Ac/deceleration time selection terminal 1
U4.04:18 Frequency source switching
U4.17:0.01S AI1 filter time
U4.22:0.01S AI2 filter time
U6.10:1 Free stop
U8.03:60S Acceleration time 2
U8.04:60S Deceleration time 2
U8.13:1 Disable Reverse
UA.00:0 PID setting source
UA.01:50% PID keyboard setting
UA.02:1 PID feedback source
UA.03:1 PID action direction
UA.05:8 Proportional gain KP1
UA.06:1.8S Integration time Ti1
UA.07:0.1S Differential time Td1
6. The notice when adjustment:
a. The PID control direction must be negative direction.
b. The inverter stop should be choose free stop when the inverter stop the motor must be Band-type brake immediately.
c. The FWD /REV acceleratine and deceleratine time is different, it need the terminal to switch the acceleratine and deceleratine time.
© 2013 Powtran All rights reserved. 粤ICP备08019850号
|A leading manufacturer and supplier of first rate variable speed drive,frequency inverter, PWM vvvf drive, vector control ac drive, motor soft starter, servo motors and drives, EMI filters, voltage: 220V, 380v, 400 v, 415v, 460V, 480V,575v, 660v,690V, 1140 VAC, and above, power: 1 hp to 840 hp (0.4kw to 630kw) or above.|
Choose your languages: Français Deutsch
|English German Spanish French Italian Portuguese Japanese Korean Arabic Russian Vietnam|